BROWSE OUR SEGMENTS

Smooth Polypropylene Cartridges: Purity and Superior Performance

Drinking water treatment (point of use or pre-reverse osmosis)
Food and beverages: mineral water, beer, wines, juices, soft drinks, edible oils
Chemical and petrochemical industries: acids, alkalis, solvents, acrylics, essences
Electronics and semiconductors: deionized water, photographic processes
Metals and electroplating: copper recovery and finishing baths
Prefilter in high purity systems for laboratories and clinics

100% virgin polypropylene: without additives, glues or surfactants, avoiding contamination
Gradual density (two layers):greater holding capacity with low pressure drop
Widechemical compatibilitywith most industrial reagents
Initial low ∆P:maintains a stable flow rate and reduces energy costs
High mechanical resistance andwithout fiber migration
Simplified waste disposal:incinerable without generating toxic waste
FDA/NSF-42 Approvedfor contact with food and beverages

Process melt-blown continuous and fully automated
Construction coreless → lighter weight and easier handling
Standard lengths:5″, 9 7/8″, 10″, 20″, 30″, 40″
Internal diameter28 mm| External diameter 63 mm (2 ½”) o 114 mm (4 ½”)
Available filtration levels: 1, 5, 10, 25, 50, 100 µm
Optional finishes 222, 226, bayonet and threads, under consultation
Operating temperature up to 60 °C

Technical Specifications of Smooth Polypropylene Cartridges

AirLink Filters’ smooth polypropylene cartridges are available in various configurations to meet the requirements of different industries and processes:

Height: 5″, 9 3/4″, 10″, 20″, 30″, 40″
Internal Diameter: 28 mm
External Diameter: 2 1/2″, 4 1/2″
Filtration Level:1, 5, 10, 25, 50, 100 microns
Maximum Temperature: 60°C
Material:Polypropylene

Model	Dimensions	Caudal *	Pressure	Temperature
AL-A/FL	5″ X 2,5″	600 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	10″ X 2,5″	1200 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	20″ X 2,5″	2000 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	30″ X 2,5″	2300 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	40″ X 2,5″	2600 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	10″ X 4,5″	3000 L/H	Δp 4 kgf/cm²	60 ºC
AL-A/FL	20″ X 4,5″	6000 L/H	Δp 4 kgf/cm²	60 ºC

OBS: If you need other models, please contact our technical consultants.

Recommended differential pressure: 4,2 kgf/cm² (20 °C) | 2,1 kgf/cm² (60 °C) | 1,2 kgf/cm² (80 °C)
Supplied in individually sealed packages to guarantee integrity and traceability
Special sizes, sanitary finishes and intermediate micron thicknesses are available upon request.
Technical specifications in PDF and certifications available upon request
Consult our technical team for compatibility with non-conventional fluids